Engraving machine is designed to engrave the image on the stone with point (raster) method. Engraving is conducted by the transference of the digital image on the surface by gradual strikes of the working instrument; that is diamond needle. Granite, Gabbros, Basalt, Marble, and Glass can be the surface to engrave the picture on it.
Engraving machine is designed to engrave the image on the stone with point (raster) method. Engraving is conducted by the transference of the digital image on the surface by gradual strikes of the working instrument; that is diamond needle. Granite, Gabbros, Basalt, Marble, and Glass can be the surface to engrave the picture on it.
Stone Impact Engraving Machine for engraving images on Granite, Marble,Glass, Gabbros and Basalt. Especially for tombstone.
The distinctive peculiarities of the machine are:
Light weight and overall dimensions what will simplify transportation, storage and, as well, use in small manufactories;
Qualitive units of brand producers (Bosch-Rexroth, Hiwin and others);
Built-in autonomous controller and non-volatile memory which do not require the connection to the computer;
High speed of the image working out and engraving;
Resistance to stoppage in power supply;
Minimal power consumption;
The use of SD-card to download images;
The sensor LCD-panel on the machine control block;
Simplicity and clearness of the built-in software;
Large selection of the grey gradation and user permission for the engraving image;
Software regulation of the speed of work by user;
Unresponsiveness to the difference in the levels of the stone surface;
The possibility to work in the vertical position;
The use of combined gears (scheme “stepping screw + scrap”) what considerably increases the speed of work and general resource of the machine;
The considerable depth of engraving;
Minimal operating costs and service;
Huge resource of units and details;
Permanent availability of repair kits and consumables including needles of high quality;
Easiness in personnel training what doesn’t need special knowledge;
1-year warranty service;
Setting out to the client to train the personnel and mortise the machine;
Permanent support of all clients, including the possibility of setting out to them at their address (throughout Ukraine) during the post-warranty period.
Technical Parameters
| Description
|
Type
| Tablet
|
Working size
| 400х600mm 600х800mm 600х1000mm 700х1200mm optional |
Weight
| 25, 19 or 16 kg
|
Power supply
| 220 V 50 Hz |
Total power
| <80W
|
Transmission type
| X-axis – screw
|
Images download
| SD-card
|
Independent controller
| Completely autonomous
|
Internal memory
| Yes; non-volatile
|
Processed materials
| Granite, Gabbros, Basalt, Marble, Glass
|
Engraving depth
| 0.5mm |
Location precision
| 0.05mm |
Engraving steps
| From 0.1 to 0.5 with the accuracy of 0.025 mm (100-20 steps/cm)
|
Grey shades
| From 2 (bit format) to 256
|
Combined regime
| Yes; 256 shades
|
Engraving speed
| 1-2,5 hours for the images with size 30х40 cm
|
Engraving tools (needles with the diamond weight 0,06 carat)
| 10-30 images with size 30х40 cm
|
Maximum incline of material
| 90 degrees
|
Warranty period
| 1 year
|
After-sale service
| Yes |